CMT 835.001.11 Rabbeting Set 1-3/8" x 1/2" H=0 to 1/2" S=1/4" Top-Flange Hangers Tooth Pitch Variable 4-6 TPI

Tooth Pitch Variable 4-6 TPI (alternate and side-set)

Length: 5-3/8 in

Bore Diameter (F) 4mm

Number of Knife Sides 4 (rotate for each new edge)

CMT 835.001.11 Rabbeting Set 1-3/8" x 1/2" H=0 to 1/2" S=1/4" Top-Flange Hangers Tooth Pitch Variable 4-6 TPIThe CMT 835. 001. 11 is a Rabbeting Bit. Rabbeting bits cut rebates (rabbets) along board edges for joinery, cabinet backs, and door frames. Interchangeable bearing set adjusts the rabbet depth. SET INCLUDES Rabbeting Bit (835. 001. 11) 5 Interchangeable Bearings for depths 0" to 1 2" SPECIFICATIONS Diameter (D) 1 3 8" Cutting Depth (H) 12. 70mm Cutting Height (I) 1 2" Total Length (L) 2 5 16" Shank (S) 1 4" Number of Teeth 2 Product Type Rabbeting